'T + K' wall bracket set for 1" to 2" pole

Suitable for mounting a large dish or aerial on a pole.

Please order pole and dish or aerial separately.

Brackets require 5 fixing bolts in total.

All bracket sets include two U bolts to clamp a pole of up to 2 inches (50mm) diameter.

(Also great for hanging ladders and bikes on the wall!)

Choose galvanised or painted from the drop-down list, below.

We recommend you prime and paint poles and brackets with an oil-based paint.
You can also add to the protection by wrapping exposed parts with Denso tape.

Our brackets are measured in inches from wall to end of bracket.
Select size from drop-down list, below.

The centre of the pole is usually around 2.5 inches from the end.

Note: 12" = approximately 305mm.
2.5" = approximately 63.5mm.

We can also supply a suitable pack of 5 bolts, plastic plugs and washers. Please change the Qty below if you require one or more packs.