|
| ||||||||||||||
|
| ||||||||||||||
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Channel Master moulded dishes by Andrews | |
|
| UK mainland delivery only (due to carriage cost). |
|
| *Note: "SMC" = Sheet Moulded Compound with embedded metal mesh The 90cm and 1.2m dishes can be motorised only if you order the polar mount instead of an AZ/EL mount. You will also need a jack arm (linear motor) and a suitable positioner to control it. See illustration on left. You WILL need to order either an AZ/EL mount or a polar mount (but not both). You will also need a suitable 3" diameter pole or mount. |
  AZ/EL mount (upside down) | UK mainland delivery only (due to carriage cost). |
| If you have only the 1.0m dish face you will need to order the LNB bracket kit and the kit of 3 "Feed Legs" which support it. | Spare Parts |
|
| |
|
| UK mainland delivery only (due to carriage cost). |
 | *Note: "SMC" = Sheet Moulded Compound with embedded metal mesh This dish can be motorised only if you order the polar mount instead of an AZ/EL mount. You will also need a jack arm (linear motor) and a suitable positioner to control it. You WILL need to order either an AZ/EL mount or a polar mount (but not both). |
| If you have only the 1.2m dish face you will need to order the LNB bracket kit and the kit of 3 "Feed Legs" which support it. | Spare Parts |