Aerials by Blake

BLAKE AERIALS FEATURE THE FOLLOWING

Enhanced for DTT reception. Simple, quick and easy assembly and installation. UK manufacturer.

"Inclined" folded tube dipole incorporating an easy fit termination with a soldered brass electrical terminal, braid clamp and a "printed circuit board balun" for improved gain, impedance match, bandwidth and impulsive noise rejection.

Watertight insulator cap, malleable in all working temperatures.

Tilt and slide clamp to facilitate elevation adjustment.

16 & 24 elements (10 and 18 directors) available. Ideal for good to medium signal strength areas.

Stylish coloured plastic components. Fortified 6 element reflector design for a refined back to front ratio. Tilt and slide clamp to facilitate adjustment in elevation.

Element design has a superior strengthened profile incorporating an enlarged moulded securing clip.

24 element booms are 2-part coupled for easy storage. Aerials are packed one per box.

Model	Elements	gain dBd	b/f ratio	focus°
SR10WB	16	11.5-13	19-21	23-24
SR13WB	19	13	22	21-23
SR18WB	24	13-14.5	23-26	17-19

Please order from the drop-down list, below.

'DIGI-MASTER X' UHF DMX05WB

32 element (5 director bays) in groups (A, K-B, WB-E-C/D). Preferred for poor to moderate signal strength areas. Narrow acceptance angle for good antighosting properties. "Oval bow tie" dipole. Fortified 8 element reflector design for a superior back to front ratio. Tilt and slide clamp to facilitate adjustment in elevation. Solid rod X element with rotate & lock design.

Model	Elements	gain dBd	b/f ratio	focus°
DMX05WB	32	10.5	21	19
DMX10WB	52	12.5	25	14

'DIGI-MASTER X' UHF DMX10WB

52 element (10 director bays) in groups (A, K-B, WB-E-C/D). Preferred for poor to moderate signal strength areas. Narrow acceptance angle for good antighosting properties. "Oval bow tie" dipole. Fortified 8 element reflector design for a superior back to front ratio. Tilt and slide clamp to facilitate adjustment in elevation. Solid rod X element with rotate & lock design.

Please order from the drop-down list, below.

8 and 14 bays of director elements W/B. Preferred for poor to moderate signal strength areas. Narrow acceptance angle for good anti-ghosting properties. Superior rugged construction. "X bow tie" dipole. Fortified 16 element reflector design for a superior back to front ratio.

Tilt and slide clamp to facilitate elevation adjustment. Solid rod X element with rotate & lock design. Aerial booms are coupled for easy storage and are packed one per box.

Model	Elements	gain dBd	b/f ratio	focus°
JBX08WB	51	12.5	23	25
JBX14WB	76	14.5	28	13

Unavailable - for info only

We don't stock the JBX versions but we can accept special orders for quantity.

Complete selection of Blake TV aerials in drop-down list here

Aerial connections should be coated with silicone grease if mounted outdoors.

You can also use these as loft aerials but the signal in the roof space is likely to be at least 3dB (50%) lower than outside.

Cable for Digital satellite and TV

To ensure the best possible reception you would be wise to use double-screened coaxial cable. No point in buying the best aerial then using poor quality cable! Read more about this on page 8

CT100 and H109 cable is what Sky use for digital satellite installation.

Short lengths (up to 30 metres) can be supplied.

Twin coaxial cable available. Clips available.