Description

Our "universal" LNBs are divided into three types:

• 1. Sky minidish "spigot" fixing. See page 1
• 2. Standard 40mm neck clamp type. This page
• 3. C120 circular flange type. This page

 Universal 40mm LNBs for standard dishes

Weatherproof your LNB connection! SatCure's unique flexible Rubber Boot is suitable for single-, twin-, quad-output or OCTO LNB "F" connectors - essential to keep out moisture. Automatic discount for 10 or more (60p), 100 or more (55p), 1000 or more (50p). Slide it up the cable to weatherproof the "F" connector. MORE INFO

UV resistant and guaranteed for 10 years if used with silicone grease as described.

Economy rubber boot pack for the cheapskates! This low cost neoprene boot is available in a pack of 4 for just 99p. We can't guarantee it will last like our flexible boot (above) but it's cheap.

TRX99ZA 40mm LNB bracket with adapter to fit Sky minidish. This bracket is normally used with a Triax minidish but fits other Sky minidishes and may give reasonable results, provided that the angle is correct. We recommend that you slide the adapter fully into the dish arm. Then slide the LNB bracket into it and stop when you get maximum signal reading. Adjust the LNB "skew" (rotational position) for maximum signal quality before tightening the small bolt at the top. We can not guarantee good results so please don't ask "will this fit my dish/LNB?" We don't know. Dish arm hole dimensions: W = 29mm H = 18mm

£2.99 Qty

AP0204806 40mm LNB bracket with adapter to fit Sky minidish. This bracket is supplied by Fortecstar and may give reasonable results on a Sky minidish, provided that the angle is correct. We recommend that you slide the adapter fully into the dish arm. Then slide the LNB bracket into it and stop when you get maximum signal reading. Adjust the LNB "skew" (rotational position) for maximum signal quality before tightening the small bolt at the top. We can not guarantee good results so please don't ask "will this fit my dish/LNB?" We don't know. Dish arm hole dimensions: W = 28mm H = 19mm

£5.49 Qty

Very low cost tiny single-output LNB with standard 40mm neck. (FSKU-V)

• 0.4dB universal FSKU-V by Fortecstar
• Horn diameter: 62mm
• Body width 61mm
• Neck: 40mm diameter x 30mm
• Weight: 180 gms

Inverto single-output universal LNB with standard 40mm neck (LNB10)

0.2dB minimum noise figure

LNB10 weighs 150 gms in box (replaces previous MTI LNB)

MTI Super, high gain low noise (LNB31A)

Single-output universal LNB with standard 40mm neck

0.2dB typical noise figure

MTI Highline, high gain 70dB (max), 65dB (typ) low noise (LNB31)

Single-output universal LNB with standard 40mm neck

0.2dB typical noise figure

Inverto twin-output universal LNB with standard 40mm neck (LNB12)

0.2dB minimum noise figure

LNB12 weighs 230 gms in box

INVERTO/MTI 0.4DB quad-output universal LNB with standard 40mm neck (LNB19)

0.4dB typical noise figure

LNB19 weighs Approx 400gms in box

Please read the LNB Information page before buying any LNB !

Inverto Quattro universal LNB with standard 40mm neck (LNB15)

0.4dB minimum noise figure

LNB15 weighs 350 gms in box

Quattro LNBs are designed to feed a multiswitch and connected with 4 coloured cables.

OCTO 8-output LNB to feed up to eight separate receivers. (LNB83)

Standard 40mm fitting.

May differ from photo.

Inverto Monoblock 6 degree dual LNB (LNB55)

• Suitable for receiving Astra-1 19'E and Hotbird 13'E.
• (Or Sirius and Thor within the footprint).

May differ from photo.

Inverto Unicable "QUAD" LNB with 3 splitters (LNB17)

Suitable for use ONLY with Unicable-compatible receivers*

LNB17 weighs 650 gms in box. Requires only one cable from LNB.

*(Check our Manhattan ST range for compatibility)

FE8 Dual LNB with 5 degree separation.
This is two "universal" LNBs in one housing.
Each LNB has its own connection.

(This is not a DiSEqC controlled LNB)

Originally designed for receiving signals from 28'E and 33'E simultaneously (for Sky plus "Opensky" broadband Internet), it is probably suitable for use with any pair of satellites that have a 5 degree separation. For example, 28.2'E and 23.5'E.

Choose delivery method

NEW RANGE - 0.3dB INVACOM LNBs

LNB40

Universal Invacom single-output LNB 0.3dB typical (0.6dB max) with 40mm neck

LNB41

Universal Invacom twin-output LNB 0.3dB typical (0.6dB max) with 40mm neck

LNB42 (QDH-031)

Universal Invacom quad-output LNB 0.3dB typical (0.6dB max) with 40mm neck.

Out and out BEST performer for fringe area reception!

LNB43

Universal Invacom quattroLNB 0.3dB typical (0.6dB max) with 40mm neck.

For use with multiswitch only.

LNB60

Universal Invacom single-output LNB 0.3dB typical (0.6dB max) with C120 flange

LNB61

Universal Invacom twin-output LNB 0.3dB typical (0.6dB max) with C120 flange

LNB62 (QDF-031)

Universal Invacom quad-output LNB 0.3dB typical (0.6dB max) with C120 flange

LNB63

Universal Invacom quattro LNB 0.3dB typical (0.6dB max) with C120 flange

For use with multiswitch only.

Choose delivery method

0.3dB Syntec LNBs

LNB68 Syntec 2000 Universal single-output LNB 0.3dB typical with 40mm neck

LNB69 Syntec 2000 Universal twin-output LNB 0.3dB typical with 40mm neck

LNB70 Syntec 2000 Universal quad-output LNB 0.3dB typical with 40mm neck to feed up to four separate receivers.