Vision V10-stealth Log-periodic wideband aerial

A balanced pair of aerials; superb at pulling in difficult signals in a noisy environment, or where multipath-reception (reflected signals) causes problems. Excellent rejection of "impulse noise".

Note: the connecting leads from balun to stacking combiner have to be cut to 3.0m each, with a 2mm tolerance between each length. This is critical for optimum performance so be patient and be prepared to spend time getting this right. WF100 cable recommended (supplied in kit). Silicone grease recommended for coating all connections and threads (supplied in kit).

You should be aware that it's a very big rig - generally too large to mount on an average size property. Although, the individual aerials are only 4'6" each in length, they are spaced 2'6" apart. It's more suitable for IRS systems, Hotels, blocks of apartments etc. However, we have sold them to be fitted to farmhouses where it's unlikely that there would be complaints from the neighbours!!. Also, it's ideal for mounting in a loft (where space permits).

Technical Specification
Gain: 13 dBd +/- 1dB across UHF band 21 - 69
Low wind resistance compared with "Yagi" arrays.
Front-back ratio: >25dB
Half Power Beamwidth (directivity): +/- 12.5° at 470MHz
Half Power Beamwidth (directivity): +/- 7.5° at 854MHz
Cross-polar rejection: >19dB
Return Loss: <11dB
Assembled size: 130cm x 108cm x 20cm
Weight: 3.4kg (7.5 lbs)
Boxed size: 131cm x 35cm x 13cm
Boxed weight: 4.6kg
Wind loading: @800N/m2 (120km/h) 84N (8.6kg)
Wind loading: @1100N/m2 (140km/h) 115N (11.7kg)
Connectors: 75 Ohm 'F' female.
Mast: Indoors 1.5" steel or alloy. Outdoors 2" dia. steel.
Elevation adjustment: infinite.
CAI benchmark standard 1 for wideband aerials CAI/AB 107

We include 6m of WF100 to connect aerials together, plus 6 x 'F' connectors and silicone grease.
Please order your desired length of "drop lead", separately.
Mast not supplied! Please order separately. See specification above.