| tvLINKplus installation with Sky Digibox used to provide the voltage. The Sky Digibox should always be positioned, so it can't "see" the infra-red signal (or reflections) from either of the transmitting "eyes", to reduce the risk of interference which will cause erratic Digibox operation. (This applies only if the tvLINKplus is powered by the Digibox RF Outlet 2. If it is connected to a separate power supply and NOT to the Digibox then you can safely point a transmitter "eye" at the Digibox front panel.) Further equipment can be "daisy chained" into the RF output between the VCR and the Sky Digibox unit. If equipment without RF loop-through sockets is used (eg most DVD players) then an RF modulator must be used to convert the DVD Scart signal to RF. DOWNLOAD PDF wiring diagram (112k) Return to catalogue. |